螺旋管聚能药包根底光面爆破机理研究及应用

针对现阶段光面爆破存在的根底不平整问题以及炸药能量利用率低的问题，提出了一种螺旋管聚能药包。为探究药包的破岩机理，采用LS-DYNA数值模拟和钻孔爆破试验相结合的方法研究了此药包的破岩机理。数值模拟结果表明，螺旋管聚能药包能形成连续金属射流侵彻炮孔孔壁，孔壁被侵彻出垂直炮孔方向的裂缝。用普通柱状药包和此药包进行钻孔爆破对比试验，结果表明，螺旋管药包试样的残留炮孔孔壁有螺旋形侵彻缝，印证了数值模拟的侵彻结果。并且相比于普通柱状药包，其炮孔利用率提高7.2%、扩孔率提高8.4%。将此药包应用于舟山绿色石化基地围垦区，结果表明，螺旋管药包爆破区域根底高度平均比普通装药低14 cm，根底高度标准差比普通装药小12 cm。研究成果在爆破工程应用中有很大价值，可以降低施工成本、加快施工进度、提高爆破效果，适合在矿山开采、井巷掘进等工程中使用。     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

具有恒定冲击载荷的梯度泡沫金属材料设计

多胞材料可通过大变形大量地吸收冲击能量，引入密度梯度可进一步提高其耐撞性。梯度多胞材料的宏观力学响应对材料密度分布极为敏感，不同类型的细观构型的影响也极为不同。已有的研究工作主要局限在对给定的密度梯度分析其动态响应，较少对耐撞性设计方法进行研究。本文针对梯度闭孔泡沫金属材料，基于非线性塑性冲击波模型发展了耐撞性反向设计方法，以维持冲击物受载恒定为目标，运用级数法获得了简化模型和渐近解。利用变胞元尺寸法构建了连续梯度变化的三维Voronoi细观有限元模型，并利用ABAQUS/Explicit有限元软件对理论设计进行数值验证。结果表明，反向设计理论简化模型的渐近解对于梯度闭孔泡沫金属材料的耐撞性设计是有效的，所提出的耐撞性设计方法在控制冲击吸能过程和冲击物受载方面具有指导意义。     

Energy-preserving algorithm for gyrocenter dynamics of charged particles

Numerical Algorithms - Gyrocenter dynamics of charged particles plays a fundamental and important role in plasma physics, which requires accuracy and conservation in a long-time simulation....     

Hydrogen-Bond Cyclization Programming of Ultrasensitive Esters and Its Application in Gene Delivery

The ester bond as a universal linker has recently been applied in gene delivery systems owing to its efficient gene release by electrostatic repulsion after its cleavage. However, the ester bond is nonlabile and is difficult to cleave in cells. This work reports a method in which a secondary amine was introduced to the β-position of the ester bond to generate a hydrogen-bond cyclization (HBC) structure that can make the ester bond hydrolysis ultrafast. A series of molecules comprising ultrasensitive esters that can be activated by H₂O₂ were synthesized, and it was found that those able to form an HBC structure showed complete ester hydrolysis within 5 h in both water and phosphate-buffered saline solution, which was several times faster than other methods reported. Then, a series of amphiphilic poly(amidoamine) dendrimers were constructed, comprising the ultrasensitive ester groups for gene delivery; it was found that they could effectively release genes under quite a low concentration of H₂O₂ (<200 μm ) and transport them into the nucleus within 2 h in Hela cells with high safety. Their gene transfection efficiencies were higher than that of PEI_25k. The results demonstrated that the hydrogen-bond-induced ultrasensitive esters could be powerfully applied to construct gene delivery systems.     

Harnack's inequality for parabolic nonlocal equations

The main result of this paper is a nonlocal version of Harnack's inequality for a class of parabolic nonlocal equations. We additionally establish a weak Harnack inequality as well as local boundedness of solutions. None of the results require the solution to be globally positive.     

Symplectic integrators with adaptive time step applied to runaway electron dynamics

Numerical Algorithms - Studying the dynamics of runaway electrons has theoretical and practical significance. As the system is highly relativistic, multi-scale and nonlinear, accurate and efficient...     

Distance-regular graphs without 4-claws

We determine the distance-regular graphs with diameter at least 3 and $c_2\ge 2$ but without induced $K_{1,4}$-subgraphs.     

A Near-Infrared-Controllable Artificial Metalloprotease Used for Degrading Amyloid-β Monomers and Aggregates

Proteolysis of amyloid-β (Aβ) is a promising approach against Alzheimer's disease. However, it is not feasible to employ natural hydrolases directly because of their cumbersome preparation and purification, poor stability, and hazardous immunogenicity. Therefore, artificial enzymes have been developed as potential alternatives to natural hydrolases. Since specific cleavage sites of Aβ are usually embedded inside the β-sheet structures that restrict access by artificial enzymes, this strongly hinders their efficiency for practical applications. Herein, we construct a NIR (near-IR) controllable artificial metalloprotease (MoS₂-Co) using a molybdenum disulfide nanosheet (MoS₂) and a cobalt complex of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (Codota). Evidenced by detailed experimental and theoretical studies, the NIR-enhanced MoS₂-Co can circumvent the restriction by simultaneously inhibition of β-sheet formation and destroying β-sheet structures of the preformed Aβ aggregates in living cell. Furthermore, our designed MoS₂-Co is an easy to graft Aβ-target agent that prevents misdirected or undesirable hydrolysis reactions, and has been demonstrated to cross the blood brain barrier. This method can be adapted for hydrolysis of other kinds of amyloids.     

Dialkoxymethano[60]fullerenes as electron acceptors in thin-film organic solar cells

This study presents the synthesis, characterization, and electrochemical properties of four new dialkoxymethanofullerenes, as well as their performance in organic solar cells (OSCs) devices. Dialkoxymethanofullerenes were synthesized in 27%–32% yield by thermolysis of dialkoxyoxadiazolines and reaction with C₆₀ under reflux in toluene. The prepared compounds were then characterized and used for the first time as electron-acceptor materials in thin-film bulk heterojunction OSCs with PBTZT-stat-BDTT-8 as the electron donor material. The devices made with ethoxy-hexyloxymethanofullerene and methoxy-hexyloxymethanofullerene exhibited optimal power conversion efficiencies (PCEs) of 3.79% and 4.65%, with open-circuit voltage of 0.832 and 0.831 V, respectively. In contrast, the devices made with ethoxy-ethoxymethanofullerene and methoxy-ethoxymethanofullerene exhibited very low PCEs of <0.01% for both, indicating a large impact of the substituents on device performance.